PDA

View Full Version : Sager NP 9260 Will Not Boot


Brunhily
10-01-2007, 01:07 AM
Ive had this Sager for two if not three months and until now its worked fine. However One day, I shut down the system and now it will not POST. Anyone have any suggestions on what to do?

I need an answer ASAP

Justin_W@XoticPC
10-03-2007, 09:44 AM
I would contact technical support at 1-800-741-2219 :)

jrwomack
10-07-2007, 07:55 PM
Ive had this Sager for two if not three months and until now its worked fine. However One day, I shut down the system and now it will not POST. Anyone have any suggestions on what to do?

I need an answer ASAP

Not sure if this helps you--but--I have this problem sometimes.
First, I do not know why it happens. However, due to similar experiences with my previous Toshiba Satelitte and my standby Sony GRZ610, stumbled on a solution thatalso worked with my Sager NP9260.

When the non-booting happens, I unplug the computer and remove the battery. I plug the computer back in and the problem vanishes. Ihave no idea why the computers behave that way and why removing the battery solves it. it just does. Consequently, I've removed the batter from my Sager and no longer even use it except when going through airports as you must show it it really is a computer. Sand battery, I have yet to experience non-booting on either the Sony or Sager.

Justin_W@XoticPC
10-08-2007, 10:00 AM
Removing the battery from the laptop, resets the computer so it's a cold fresh boot. When you remove the battery is clears any bad executions out of memory and allows the computer to boot correctly.