• Welcome to XOTIC PC Forums! If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

8800M Install Guide

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 8800M Install Guide

    (Moved from Article Section.)

    Here are some blown up images of the 8800 and a Quick Un-Install guide for the M570RU/5792 Video Card. I figured everyone would like to see it up close and personal so the images are a little large.

    For 9262 users, I have provided a image below showing where the "Bridge Cable" connects to the 8800M GTX for SLi.


    Uninstall Information
    1. Remove the back Panel on the back of the 579x. You wil see the video card
    in copper casing. Below you will see what it looks like with the video card
    out.



    2. Next you will remove the video card. There are 7 Screws that need to be
    removed to remove the card. You will see them labeled 1-7 below. Once you
    remove screws 1-4 the copper heatpipe assembly can be removed off of the video
    card and out of the system.



    3. After removing the heatpipe assembly you will only see the video card that
    is protected with a copper heatsink casing. (Pictured below). Screws 5-7
    release it from the motherboard and you can now remove the video card (Pull up
    slightly and backward out toward the back of the system)



    On the copper casing you will see some brief install/uninstall notes. (All
    screws are labeled in the order they need removed.)

    That is it for the removal, now some pictures of the 8800M GTX:





    For those that have 9262's, I have labeled where the "Bridge Cable" connects
    to the 8800M GTX for SLi Mode.

    Justin Nolte
    [email protected]
    http://www.xoticpc.com
Working...
X